Download Posiflex LCD driver windows 7 / 10

Download Posiflex LCD driver windows 7 / 10

Important notice The information displayed below this paragraph is for reference purposes only. The information may be generic in nature, which covers the entire range of products that fall within this category, and might not apply to this specific model. Please select the correct model as per the above description.

Reviews have been submitted by users and do not necessarily reflect our own opinion.

© Respective owners and brand holders. © 2021 ComXpert International CC. The contents has been generated by ComXpert International CC (//www.comx-computers.co.za). All products are sourced locally in South Africa and the warranty is that of the local supplier only. E&OE.


This part of our web site contains the data sheets for the Liquid Crystal Display drivers and controllers. There are three categories of devices listed here:

1. LCD Drivers. These ICs control the complex AC voltage requirements for the LCDs and they need a LCD controller to keep refreshing the individual pixel information to their drive circuitry. These ICs will typically be integrated into the LCD Modules made by Pacific Display Devices.

I am sure it has to do something with two or more scripts trying to access the lcd at nearly the same time.
I assumed having the ability to address the writing per line wouldn't cause any issues, but it doesn't seem that way.

I have following problem:

Copy link Quote reply

Thanks, Denis. Great implementation.

When attaching a CP210x device, it will be necessary to install drivers associated with the device's VID/PID combination before the device will be properly recognized. In most cases, this involves either downloading and manually installing the default driver, or a driver that has been modified by using the utility found with AN200, here: https://www.silabs.com/support/resources.ct-application-notes.ct-example-code.p-interface

The default, unmodified drivers from this site are associate with the VID and PID programmed onto CP210x devices by default. These defaults are listed below:

CP210x USB-to-UART devices necessarily require drivers to operate. These drivers can normally downloaded and installed from here: http://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

However, it is also possible to automatically download install these drivers using Windows Update. Doing this requires a different set of PIDs to be programmed onto the CP210x devices. This allows a user to merely connect a CP210x device to a Windows machine and be able to use it without having to manually download install drivers. The PIDs that must be programmed to the CP210x device are listed below: